Carte mère 3,5" industrielle NF3A-3827 Agrandir l'image

Carte mère 3,5" industrielle NF3A-3827

CMJEJNF3A-3827

Jetway

3.5", Proc. Intel Celeron E3827, 2xCore, 1.75GHz, TDP 8W,2xGlan, DVI, LVDS, 8xUSB2, DDRIII SODIMM, 2xmPCIE, SATA2, 3xRS232, 1xRS422/485, +9-24V

Plus de détails

La carte mère NF3A-3827 au format 3,5", sans ventilateur, avec processeur Intel Mobile Atom E3827 est une excellente plateforme pour les projets informatiques embarqués

- Intel Celeron N2930/N2807/Atom E3827 SoC Processor
- Embedded Long-life Series, 5 Year Availability
- 3.5" SBC Form Factor Design for Fanless Systems
- Built-in Wide Range +9V – 24V DC jack
- Supports up to 2 Display, DVI-I, 24bit LVDS
- ECO-design for EuP/ErP
Jetway NF3A 3.5" SBC Motherboard
ProcessorIntel® Celeron N2930 SoC, 1.83GHz – 2.16GHz Burst, Quad-Core, 7.5W TDP/4.5W SDP
Intel® Celeron N2807 SoC, 1.58GHz – 2.16GHz Burst, Dual-Core, 1MB, 4.5W TDP/3.0W SDP
Intel® Atom E3827 SoC, 1.75GHz, Dual-Core, 8W TDP, with AES-NI support
Memory1 x 204-pin DDR3L-1333 SO-DIMM up to 8GB (1.35V required)
GraphicsIntel HD Graphics, 313MHz - 854MHz
AudioRealtek ALC662 HD Audio codec
LAN2 x Realtek RTL8111G Gigabit LAN with Enhanced Surge Protection
Storage1 x SATA2 3Gb/s Connector
1 x Shared mSATA/mini-PCI Express Combo slot (Full-size)
Super IOFINTEK F81866A
Back Panel Connectors
1 +9V ~ +24V DC-in Jack
1 DVI-I
1 USB 3.0
3 USB 2.0
2 RJ45 LAN (10/100/1000)
1 3.5mm Audio connector (Line-OUT)
Onboard I/O Connectors
1 SATA2 3Gb/s Connector
1 Shared mSATA/mini-PCI Express Combo slot (full-size)
1 Mini-PCI Express slot (half-size)
4 Serial port headers (3 * RS232, 1 * RS232/422/485)
2 USB Pin Headers for up to 4 additional USB 2.0 Ports
1 24-bit dual channel LVDS connector/inverter (CHRONTEL CH7511B chipset up to 1920 x 1200)
1 8 bit GPIO Header
1 AT/ATX Mode jumper
1 PS/2 Mouse/Keyboard header
1 Chassis Intrusion header
2 2-pin LAN LED header
1 2-pin SPDIF header
1 4-pin SMBUS header
1 9-pin Audio Connector
1 Front Reset/Power buttons
1 4-pin Fan Header
1 4-pin Floppy Power Output (Male)
Power Supply for NF3A
External Power Supply – the board can be powered with a +9V ~ +24V +-3% external power supply though a DC connector on the back panel. The rear +9V ~ +24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9V ~ +24V and the shell is GND.
Market Segments Supported
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC