> >>>>Carte mère Mini ITX NF9N-2930
Carte mère Mini ITX NF9N-2930 Agrandir l'image

Carte mère Mini ITX NF9N-2930

CMJEJNF9N-2930

Jetway

Mini ITX, Intel Celeron N2930 CPU,
2x Sodimm Dual Channel DDR3L 1333/1066 MHz 8GB MAX,VGA, HDMI,
LVDS, USB 3.0, 7xUSB 2.0, 2xSATAII, mini-PCIe, PCIe, mSATA, GLAN

Plus de détails

Carte mère Mini ITX industrielle avec un cycle de vie prévu jusqu'en 2019.

- Intel Celeron N2930 SoC Processor
- Embedded Long-life Series, Lifecycle through Q1'2019
- Supports DDR3L-1333 1.35V SODIMM up to 8GB Total
- Supports Jetway Daughter Board Gen2
- +12V DC-In Onboard or Alternate Internal 20-pin ATX
- ECO-design for EuP/ErP
Jetway NF9N Mini-ITX Motherboard
ProcessorIntel® Celeron N2930 SoC, 1.83GHz – 2.16GHz Burst, Quad-Core, 7.5W TDP/4.5W SDP
Memory2 x 204-pin SODIMM DDR3L-1333 Single Channel up to 8 GB (1.35V required)
GraphicsIntel HD Graphics, 313MHz - 854MHz
AudioRealtek ALC662 5.1 Channel HD Audio with 3W Amplifier
LAN1 x Intel I211at Gigabit Ethernet
Storage2 x SATA2 3Gb/s Connectors
1 x Full-size Msata slot
Super IOFINTEK F81768D
Back Panel Connectors
1 PS2 Keyboard
1 PS2 Mouse
1 VGA
1 RS232 COM Port
3 USB 2.0
1 RJ45 LAN (10/100/1000)
1 +12 DC-in jack
1 HDMI
1 USB 3.0
1 3.5mm Audio Jacks (Line Out)

Onboard I/O Connectors
1 Jetway Daughter Board Gen2 Connector
1 PCI Express x1 Slot
1 Full size Msata Slot (shares with 2nd SATA port)
1 Full size mini PCI-E Slot
2 SATA2 3Gb/s Connectors
2 USB 2.0 Pin Headers for up to 4 additional USB 2.0 Ports
1 Serial Port Header (RS232, +5V/+12V)
1 24-bits Dual Channel LVDS/Inverter (CHRONTEL CH7511B)
1 GPIO header
1 Parallel Port header
1 AT/ATX Mode jumper
1 Chassis Intrusion header
1 9-pin Audio header
1 4-pin Speaker Power header
1 4-pin CD-in header
1 4-pin line-in header
1 2-pin LAN LED header
1 2-pin SPDIF header
1 4-pin SMBUS header
1 Front Panel header
3 Fan headers
1 20-pin ATX Power Connector
1 4-pin SATA Power Output (Male)
1 2-pin 12V ATX Power Connector for alternate internal power supply (Molex 5566-2)
Power Supply for NF9N
External Power Supply – the board can be powered with a 12V external power supply though a DC connector on the back panel. The rear 12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is 12V and the shell is GND.
Internal Power Supply – the board can, alternatively, be powered by an internal 20-pin ATX OR ATX12V 1 x 2 power connector.

Based on power consumption test results, the recommended power rating is 60 W (12V/5A).

Caution: There is no isolation circuitry between the external 12V DC jack and the internal 20-pin ATX & 1 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external 12V DC jack is covered if the internal 20-pin ATX OR 1 x 2 power connector is to be used.
Market Segments Supported
√ Digital Signage
√ Panel PC
√ Industrial Automation/Control
√ All-In-One
√ Retail (POS/Kiosk/ATM)
√ Casino Gaming
√ Thin Client
Environment
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C