> >>>>Carte mère Mini ITX industrielle NF9HG-2930
Carte mère Mini ITX industrielle NF9HG-2930 Agrandir l'image
Précédent Suivant

Carte mère Mini ITX industrielle NF9HG-2930

CMJEJNF9HG-2930

Jetway

Mini ITX, Intel Celeron N2930, 1.86Ghz, 2*DDR3L 8G Max.,
2*SATA2, 1*mSATA, 4*RJ45, 5*USB2, 1*USB 3.0, 2*RS232/422/485, 1*VGA, 1*PCIe X1, 1*mPCI-e, 1*PS/2, 1*SIM Card, 12V DC

Plus de détails

Cette carte mère industrielle de Jetway au format Mini ITX pour processeurs Intel Celeron N2930 avec un cycle de production prévu jusqu’au 1er trimestre 2021, est équipé de 4 ports LAN et dispose d’un slot d’extension permettant de prendre en charge une carte PCIe avec 4 ports LAN (JETB4G) ou une carte PCIe avec 4 ports LAN et 1 Bypass sur une paire (JETB4B). La carte mère NF9HB de Jetway convient parfaitement aux applications d’automatisation industrielle, réseau, client léger.

- Intel Celeron N2930 SoC Processor
- Embedded Class Planned Lifecycle through Q1'2021
- Quad Gigabit Intel LAN
- Ultra Slim Design with 20mm z-height and Low Profile IO Shield
- 12V DC-in or Alternate Internal 2-pin Power Connector
- ECO-design for EuP/ErP
.
ProcessorIntel® Celeron N2930 SoC, 1.83GHz – 2.16GHz Burst, Quad-Core, 7.5W TDP/4.5W SDP
Memory2 x 204-pin DDR3L-1333 SO-DIMM up to 8GB (1.35V required)
GraphicsIntel HD Graphics, 313MHz - 854MHz
AudioNA
LAN4 x Intel i211AT Gigabit Ethernet
Storage2 x SATA2 3Gb/s Connector
1 x mSATA (Full size)
Super IOFINTEK F81768D-I
Back Panel Connectors
112V DC-In jack
1 Serial port (RS232/422/485)
1 USB 3.0
1 USB 2.0
4 RJ45 LAN (10/100/1000)
Onboard I/O Connectors
2PCI Express x1 Slot
1 Full size mSATA Slot
1 Full size mini PCI-E Slot
2 SATA2 3Gb/s Connectors
2 USB Pin Headers for up to 4 additional USB 2.0 Ports
1 Serial Port Header
1 SIM Card Holder
1 AT/ATX power switch mode select jumper
1 Chassis Intrusion Header
1 VGA Header
1 5-pin SMBUS(I2C) Header
1 8-bit GPIO Header
4 2-pin LAN LED Header
1 9-pin Front Panel Header
1 7-pin PS2 Keyboard Mouse Header
3 4-pin Fan Headers
1 2-pin +12V Alternate Power Connector (Molex 5566-2)
Power Supply for NF9HG
External Power Supply– the board can be powered with a 12V external power supply though a DC connector on the back panel. The rear 12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is 12V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal 12V DC 1 x 2 power connector, where pin 1 is GND and pin 2 is +12 (±10%) VDC. The internal 1 x 2 power connector is a Molex 5566-2 header which accepts a Molex 5557-02R connector from the power supply. 

Caution: There is no isolation circuitry between the external 12V DC jack and the internal 1 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external 12V DC jack is covered if the internal 1 x 2 power connector is to be used.
Market Segments Supported
√ Networking/Network Appliances
√ Industrial Automation/Control
√ Thin Client
Environment
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C