> >>>>Carte mère au format NUC NU591
Carte mère au format NUC NU591 Agrandir l'image

Carte mère au format NUC NU591

CMJEJNU591-3150

Jetway

NUC form, CPU Intel Celeron N3150 Quad Core,1.6Ghz max 2.08Ghz,
Glan, 2xHDMI, DP, 2xUSB2, 4xUSB3, SODIMM DDR3L,
mPCIe, SATA3, 1xRS232, 12V DC-in

Plus de détails

Carte mère industrielle au format NUC (101mnx101mn), fanless et prévue pour une longue durée de vie (fin 2020)

- Intel Celeron Braswell N3150 SoC Processor
- Embedded Long-life Series, Planned Lifecycle Through Q4'2020
- NUC Form Factor (101mm X 101mm) Design for Fanless Systems
- Supports 2 x HDMI and 1 x DP for 3 Independent Display
- 12V DC-In & 2 x LAN
- ECO-design for EuP/ErP
Model No.NU591-3150
Part No.JNU591-3150
Jetway NU591 NUC Motherboard Specification
ProcessorFanless Intel® Celeron N3150 SoC, 1.60GHz – 2.08GHz Burst, Quad-Core, 6W TDP/4W SDP, with AES-NI support
* Ships with heatsink/fan installed for bench testing
Memory1 x 204-pin SODIMM DDR3L-1600 Dual Channel 1.35V required (up to 8 GB)
* 1600MHz memory will run at 1600MHz
* 1333MHz memory will run at 1066MHz
* 1066MHz memory not supported
GraphicsIntel HD Graphics, 320MHz - 640MHz
AudioRealtek ALC662VD 4 Channel HD Audio
LAN2 x Intel I211-AT Gigabit LAN
Storage1 x Full Size Msata Slot
1 x SATA3 6Gb/s Connector
Super IOFINTEK F81803U
Form FactorNUC Form Factor (101mm X 101mm)
Back Panel Connectors
2 HDMI 1.4b (1920 x 1080 @ 60Hz)
2 USB 2.0 ports
2 RJ-45 ports (10/100/1000)
1 DP 1.1 (2560 x 1600 @ 60Hz or 3840 x 2160 @ 30Hz)
1 Line out / MIC in Combo Jack
1 12V DC-in jack
Front Panel Connectors
2 USB 3.0
1 RS232/422/485 COM port
Onboard I/O Connectors
1 Full size Msata / mini PCI-E Combo Slot
1 Half size mini PCI-E Slot
1 SATA3 6Gb/s Connector
1 USB Pin Header (2.0 mm pitch) for up to 2 additional USB 2.0 Ports
1 Chassis Intrusion Jumper
1 AT/ATX Mode Jumper
1 10-pin GPIO Header
1 5-pin SMBUS Header
1 3-pin Fan Connector
1 4-pin Front Panel Connector
1 4-pin Power-out Connector (Male) for 2.5" HDD
1 SIM Card Holder
Power Supply for NU591
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V (±5%) and the shell is GND.
Market Segments Supported
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
Environment
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C