Mini PC Fanless pour véhicules AIV-HM76V0FLI71
Référence : BBACAIV-HM76V0FLI71
Marque : Acrosser
Mini PC Fanless pour véhicules avec Intel Core i7 3720QM
HDMI/DVI/VGA, 4 USB 3.0, CAN bus 2.0 A/B
Alimentation 9~32 VDC intelligente (gestion clef de contact)
-20° to 60°C Op. Temp., CE, FCC class B , E-Mark
Options : Wi-Fi, Bluetooth, 3.5G, GPS
Le AIV-HM76 est un PC fanless pour véhicules (bateau, voiture, 4x4, bus) qui embarque des processeurs I3/I5/I7 de 3eme génération. Il intègre une alimentation intelligente (gestion de la clef de contact). Cet ordinateur peut recevoir des modules CAN Bus, WiFi, 3.5G Bluetooth et GPS.
- Intel Core i7 3720QM 2.6GHz Processor
- Fanless thermal design and anti-vibration industrial design
- HDMI/DVI/VGA video outputs
- Combo connector for Acrosser’s In-Vehicle monitor
- 4 external USB 3.0 ports
- CAN bus 2.0 A/B
- Wi-Fi, Bluetooth, 3.5G, GPS
- One-wire (i-Button) interface
- 9-32 VDC power input
- -20 to 60 degree C operating temperature
System | |
CPU | Intel Core i7 3720QM Intel HM76 |
Chipset | 2 x 204-pin DDR3-1333 SO-DIMM 2GB pre-installed, up to 16GB |
Video | |
Graphic Controller | Integrated in Processors |
Video Memory | DVMT |
Video Interface | 1 x HDMI type A connector 1 x DVI-D connector 1 x dedicated combo connector (VGA/USB/audio/power) |
Storage | |
SATA | 2 x SATA III port with power connector |
CF | 1 x Compact Flash Type I/II slot support UDMA 33 |
Disk Bay | 1 x swappable 2.5” HDD bay with Anti-vibration / Anti-shock solution |
Communication | |
Ethernet | 2 x Intel GbE chip via RJ-45 connector |
USB | 4 x USB 3.0 connector & 2 x JST pin header |
Serial Port | 2 x RS232 (1 x DB9, 1 x pin header) 1 x RS232/422/485 (DB9, switch selectable) |
I/O | |
Expansion Slot | 2 x Mini PCIe (For Optional 3.5G / Wifi module only) |
GPIO | 8-bit GPIO (4 In, 4 Out) |
Antenna Hole | 1 x SMA for GPS, 1 x SMA for 3.5G, 2 x SMA for WiFi 1 x SMA for Bluetooth |
SIM | SIM Slot x 1, SIM card changeable without opening case |
Security | Support I-Button for driver ID |
CAN BUS | Support CAN 2.0A/2.0B protocol |
Others Feature | |
Audio | Audio Codec (Line-out & MIC) |
Hardware Monitor | CPU voltage and temperature |
WatchDog Timer | 1~255 sec. software programmable |
Indicator | Power / HDD/ Stauts LED |
Power Requirement | |
Power Input | 9~32 V (+/-5%) single voltage input, 3 poles terminal block |
Power Consumption | Max 80W (i7 CPU) |
Software | |
OS Support | Windows XP, Windows 7, Fedora 14, Ubuntu 10 |
Mechanical & Environment | |
Thermal Design | Fanless |
Chassis Material | SECC + Aluminum heatsink |
Vibration | IEC 60068-2-64, 5~500Hz, 3GRMS(CF/SSD), Operating with SSD |
Shock | IEC 60068-2-27, 50G 500m/s2 11MS, Operating with SSD |
Dimension | 310mm x 195mm x 80mm |
Weight | 6 kg |
Operating Temp. | -20 ~ 60°C |
Storage temp. | --40 ~ 80°C |
Relative Humidity | 0 ~ 90% @ 40C, non-condensing |
Safety | CE, FCC class B , E-Mark |
Smart In-Vehicle Power Management | |
O/S Anti-Crash | Smart O/S boot/shut-down control by power subsystem |
System boot / Shut-down delay |
Delay time from 0 seconds to 60 minutes setting in BIOS |
System boot fail retry | 3 times boot fail retry ● System power switch |
Power on/off switches | ● System power switch by remote cable switch ● System power input serial connection to car battery and ignition switch |
Car battery protection | Low battery voltage monitoring and configurable auto shutdown low battery voltage level |