Mini PC Fanless pour véhicules AIV-HM76V0FLI71



Mini PC Fanless pour véhicules avec Intel Core i7 3720QM
HDMI/DVI/VGA, 4 USB 3.0, CAN bus 2.0 A/B
Alimentation 9~32 VDC intelligente (gestion clef de contact)
-20° to 60°C Op. Temp., CE, FCC class B , E-Mark
Options : Wi-Fi, Bluetooth, 3.5G, GPS

Plus de détails

Le AIV-HM76 est un PC fanless pour véhicules (bateau, voiture, 4x4, bus) qui embarque des processeurs I3/I5/I7 de 3eme génération. Il intègre une alimentation intelligente (gestion de la clef de contact). Cet ordinateur peut recevoir des modules CAN Bus, WiFi, 3.5G Bluetooth et GPS.

- Intel Core i7 3720QM 2.6GHz Processor
- Fanless thermal design and anti-vibration industrial design
- HDMI/DVI/VGA video outputs
- Combo connector for Acrosser’s In-Vehicle monitor
- 4 external USB 3.0 ports
- CAN bus 2.0 A/B
- Wi-Fi, Bluetooth, 3.5G, GPS
- One-wire (i-Button) interface
- 9-32 VDC power input
- -20 to 60 degree C operating temperature

CPUIntel Core i7 3720QM
Intel HM76
Chipset2 x 204-pin DDR3-1333 SO-DIMM
2GB pre-installed, up to 16GB
Graphic ControllerIntegrated in Processors
Video MemoryDVMT
Video Interface1 x HDMI type A connector
1 x DVI-D connector
1 x dedicated combo connector (VGA/USB/audio/power)
SATA2 x SATA III port with power connector
CF1 x Compact Flash Type I/II slot support UDMA 33
Disk Bay1 x swappable 2.5” HDD bay with Anti-vibration /
Anti-shock solution
Ethernet2 x Intel GbE chip via RJ-45 connector
USB4 x USB 3.0 connector & 2 x JST pin header
Serial Port2 x RS232 (1 x DB9, 1 x pin header)
1 x RS232/422/485 (DB9, switch selectable)
Expansion Slot2 x Mini PCIe (For Optional 3.5G / Wifi module only)
GPIO8-bit GPIO (4 In, 4 Out)
Antenna Hole1 x SMA for GPS, 1 x SMA for 3.5G, 2 x SMA for WiFi
1 x SMA for Bluetooth
SIMSIM Slot x 1, SIM card changeable without opening case
SecuritySupport I-Button for driver ID
CAN BUSSupport CAN 2.0A/2.0B protocol
Others Feature
Audio Audio Codec (Line-out & MIC) 
Hardware Monitor CPU voltage and temperature 
WatchDog Timer 1~255 sec. software programmable 
Indicator Power / HDD/ Stauts LED 
Power Requirement 
Power Input 9~32 V (+/-5%) single voltage input, 3 poles terminal block 
Power Consumption Max 80W (i7 CPU) 
OS Support Windows XP, Windows 7, Fedora 14, Ubuntu 10 
Mechanical & Environment 
Thermal Design Fanless 
Chassis Material SECC + Aluminum heatsink 
Vibration IEC 60068-2-64, 5~500Hz, 3GRMS(CF/SSD),
Operating with SSD
Shock IEC 60068-2-27, 50G 500m/s2 11MS,
Operating with SSD
Dimension 310mm x 195mm x 80mm 
Weight 6 kg 
Operating Temp. -20 ~ 60°C
Storage temp.--40 ~ 80°C
Relative Humidity0 ~ 90% @ 40C, non-condensing
SafetyCE, FCC class B , E-Mark
Smart In-Vehicle Power Management
O/S Anti-CrashSmart O/S boot/shut-down control by power subsystem
System boot /
Shut-down delay
Delay time from 0 seconds to 60 minutes setting
System boot fail retry3 times boot fail retry
● System power switch
Power on/off switches ● System power switch by remote cable switch
● System power input serial connection to car battery
and ignition switch
Car battery protectionLow battery voltage monitoring and configurable auto
shutdown low battery voltage level